McKee's 37 Universal Clay Lubricant 128 oz

$42.99





McKee's 37 Universal Clay Lubricant provides a super slick surface that allows gritty particles captured by the clay bar to glide just above the surface of the paint. It thoroughly wets the paint surface to enable you to rub the clay bar effortlessly.

This VOC compliant lubricant spray contains no gloss agents so you can see the true results of the clay bar. When you are finished claying an area, use McKee's 37 Universal Clay Lubricant to remove any clay residue. It can also be used to remove fingerprints and dust in between details.

McKee's 37 Universal Clay Lubricant is water-based. It will not degrade synthetic or natural clay, and overspray will not affect glass, metal, plastic, or rubber. Use it with McKee's 37 Universal Detailing Clay to create a smooth, silky finish that is completely clean.

Both the McKee's 37 Universal Detailing Clay and the McKee's 37 Universal Clay Lubricant can be mixed and matched with other clays and lubricants without affecting the performance of either. They’re universal!

Experience clean, silky auto paint without any risk. McKee's 37 Universal Clay Lubricant provides essential paint protection during the detailing clay process.

Directions:

On a freshly washed vehicle, mist a 2 ft. x 2 ft. area of paint with McKee's 37 Universal Clay Lubricant.

Gently rub the clay bar back and forth across the wet area only. It will grab initially. This is the clay grabbing contaminants that protrude above the clear coat surface. When the clay glides freely, the surface is clean.

Wipe off the area with a clean microfiber towel. Use the clay lubricant to remove any remaining clay residue.

Before moving on to the next section, inspect the clay to see if it appears soiled. If so, reshape the clay to reveal a clean side. If you drop the clay on the ground, discard it.

To store the clay, moisten it with clay lubricant and seal it in a plastic bag within its plastic case.