• Scholl Concepts A15+ 1-Step All-round Polish 1 litre

  • $26.99 $52.99

  • Share this product

Description

SCHOLL Concepts A15+ All-Round Polish is an all-in-one cutting polish and paint protectant designed for enhancement duties on modern ceramic nano-particle and scratch-resistant clear-coats (although it also produces great results on conventional paint finishes too). SCHOLL Concepts A15+ All-Round Polish uses intelligent Power Technology (iPT) abrasives that break down quickly in use to form a progressively finer polishing residue. As a result, the level of cut on offer diminishes quickly from that of a light-cutting polish to that of a finishing polish, meaning that it's possible to correct and refine the finish in a single step. To ease this process, SCHOLLConcepts A15+ All-Round Polish contains advanced lubricants that maximize its efficiency, plus synthetic waxes that mask residual defects and impart durable high gloss protection.

You can use SCHOLL Concepts S20 Blue One-Step Polishing Paste by hand or machine, although for best results we recommend the latter. By hand, apply SCHOLL Concepts S20 Blue One-Step Polishing Paste with a SCHOLL Concepts Polishing Puck. Only 3-4 pea-sized drops of product are required per 12 x 12 area. You should work it as firmly and evenly as possible until only a thin residue remains. Buff off the residue carefully using a PB Super BuffingTowel.

For best results using a dual action polisher, you should work SCHOLL Concepts S20 Blue One-Step Polishing Paste with a SCHOLL Concepts 145 mm Polishing Pad. Once the pad is well primed, only 3-4 pea-sized drops of product are required per 18 x 18 area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers), applying moderate pressure for the first 90 seconds or so, and then progressively lighter pressure for a further 90 seconds (at this stage you should switch to a pre-primed SCHOLL Concepts 145 mm Finishing Pad if a one-step process is desired). Once done, buff off the final residue carefully using a PB Super Buffing Towel.

For best results using a rotary polisher, you should work SCHOLL Concepts S20 Blue One-Step Polishing Paste using a SCHOLL Concepts 145 mm Polishing Pad.  Once the pad is well primed, only 1-2 pea-sized drops of product are required per 18 x 18 area. You should work it thoroughly at 1200-1800 revolutions per minute (speed 3-4 on most rotary polishers), applying moderate pressure for the first 45 seconds or so, and then progressively lighter pressure for a further 45 seconds (at this stage you should switch to a pre-primed SCHOLL Concepts 145mm Finishing Pad if a one-step process is desired). Once done, buff off the final residue carefully using a PB Super Buffing Towel.

Customer Reviews

Based on 1 review Write a review