Scholl Concepts S30+ Nano-Compound 1 kg

$62.99





SCHOLL Concepts S30+ Nano-Compound is a fine abrasive polish designed to remove minor paint defects, such as wash marring and faint swirl marks, from modern ceramic nano-particle and scratch-resistant clearcoats (although it also produces great results on conventional paint finishes too). It also nips out machine holograms with ease, making it a good choice of finishing polish for use after compounding. It works by using intelligent Power Technology (iPT) abrasives to burnish painted surfaces to perfection. Advanced lubricants extend its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.

You can use SCHOLL Concepts S30+Nano-Compound by hand or machine, although for best results we recommend the latter. By hand, apply SCHOLL Concepts S30+ Nano-Compound with a SCHOLLConcepts Polishing Puck. Only 3-4 pea-sized drops of product are required per 12 x 12 area. You should work it as firmly and evenly as possible until only a thin residue remains. Buff off the residue carefully using a PB Super BuffingTowel.

  For best results using a dual action polisher, you should work SCHOLL Concepts S30+ Nano-Compound with a SCHOLL Concepts 145 mm Finishing Pad. Once the pad is well primed, only 3-4 pea-sized drops of product are required per 18 x 18 area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers), applying moderate pressure for the first 90 seconds or so, and then progressively lighter pressure for a further 90 seconds. Once done, buff off the final residue carefully using a PB Super Buffing Towel.


For best results using a rotary polisher, you should work SCHOLL Concepts S30+ Nano-Compound using a SCHOLLConcepts 145 mm Finishing Pad. Once the pad is well primed, only 1-2 pea-sized drops of product are required per 18 x 18 area. You should work it thoroughly at 1200-1800 revolutions per minute (speed 3-4 on most rotary polishers), applying moderate pressure for the first 45 seconds or so, and then progressively lighter pressure for a further 45 seconds. Once done, buff off the final residue carefully using a PB Super Buffing Towel.You can use SCHOLL Concepts S17+ High Performance Compound by hand or machine, although for best results we recommend the latter. By hand, apply SCHOLL Concepts S17+ HighPerformance Compound with a SCHOLL Concepts Polishing Puck.  Only 3-4 pea-sized drops of product are required per 12 x 12 area. You should work it as firmly and evenly as possible until only a thin residue remains. Buff off the residue carefully using a PB Super Buffing Towel.

For best results using a dual action polisher, you should work SCHOLL Concepts S17+ High Performance Compound with either a SCHOLL Concepts 145 mm Cutting Pad or a SCHOLL Concepts 145 mm Polishing Pad. Once the pad is well primed, only 3-4 pea-sized drops of product are required per 18 x 18 area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers), applying moderate pressure for the first 90 seconds or so, and then progressively lighter pressure for a further 90 seconds (at this stage you should switch to a pre-primed SCHOLL Concepts 145 mm Finishing Pad if a one-step process is desired). Once done, buff off the final residue carefully using a PB SuperBuffing Towel. For best results using a rotary polisher, you should work SCHOLL Concepts S17+ High Performance Compound using either a SCHOLL Concepts 135 mm SOFTouch Wool Pad, a SCHOLL Concepts 145mm Cutting Pad or a SCHOLL Concepts 145 mm Polishing Pad. Once the pad is well primed, only 1-2 pea-sized drops of product are required per 18 x 18 area. You should work it thoroughly at 1200-1800 revolutions per minute (speed 3-4 on most rotary polishers), applying moderate pressure for the first 45 seconds or so, and then progressively lighter pressure for a further 45 seconds (at this stage you should switch to a pre-primed SCHOLL Concepts 145 mm Finishing Pad if a one-step process is desired). Once done, buff off the final residue carefully using a PB Super Buffing Towel.

Customer Reviews

Based on 1 review Write a review