CarPro CQuartz UK Edition 50 ml

CarPro

$74.99





Product Description

CarPro CQuartz UKEdition (50ml)

Coat your car with theglossiest and hardest coating available on the open market!

The incredible 70% SiO2with 99.9% purity formula is based on the same technology as the originalCquartz with some interesting tweaks. Other ceramic coatings have far less SiO2 (Quartz) in the producthowever CQUK has 70% SiO2 with 99.9% purity. This is the first ever coating which has this concentration! The pure quality ensures the most transparentglass coat film over the surface, which guarantees long lasting coating withextreme strength and water-repellency. Once the liquid meets the open air it cures and forms a ceramic quartzhard coating on the surface with extreme hydrophobicity and gloss beyond eventhat of CQuartz.

Kit Includes:

 

  • (1) 50ml bottle of CQuartz UK Edition(Approximately 4-7 average size vehicles)
  • (1) CarPro Foam Applicator Block
  • (4) 4" MF Suede applicators

 

Features:

 

  • Protection and glosscomparable to the best professsional cotings available but easy to use for alldetailers
  • CQUK has 70% SiO2 with99.9% purity!!!
  • Extremely deep, richGloss
  • Easy maintenace with"self cleaning" properties (Stays cleaner than waxes, sealants andother coatings)
  • Resistance to WashInduced Marring
  • Average thickness ofCquartz UK layer is between 1 µm ~2 µm per layer
  • Minor swirl fillingabilities
  • Repels water, oils,dirt, and contaminants
  • Protection from UV rays
  • Resists stains, birddroppings, water spots, and traffic film
  • Resists extremely hightemperatures. Feel free to coat enginecomponents, etc that correspond to the materials shown.
  • Ultra hard CQuartz UKcontains ceramic nano particles found within glass, the result is a highlyreflective, transparent layer.
  • Can also belayered: Allow 1 hour minimum wait timeafter buffing to allow cure before applying another coat.

 

Surfaces you canprotect with CQuartz:

 

  • Paint
  • Wheels
  • Metals

 

Specifications:

 

  • Recommended workingtemperatures: 41F to 90F
  • Durability:Approximately 2 years or more
  • Water contact angle:110°
  • Light swirl fillingproperties
  • Thick layer: 1~2 Microneach

 

Preparation Tips:

 

  • If contamination existsit is recommended that you IronX and clay your vehicle before polishing.
  • To gain the most fromCquartz it is recommended that your vehicle have all painted surfaces clean andpolished to a high standard.
  • Use CarPro Reflect toachieve an incredible high gloss finish!
  • Use CarPro Eraser toremove all oils leftover from polishing which would hamper the penetration ofCquartz and seriously compromise durability.

 

Directions:

 

  • Wrap a mf Suede(included) around the applicator block (also included)
  • Shake CQuartz UK welland apply to the applicator
  • Spread across surfaceand buff in over entire section until it begins to disappear and flashes
  • Using a 16" Suedemf towel, wipe off residue to ensure flat streak-free finish
  • *Note: If applying incold weather below 65-70F, allow to sit 2-5 minutes before wiping off
  • Move to next sectionand repeat
  • Apply Reload 1 hour ormore from the start of CQUK application

 

Tips:

 

  • Park vehicle in directsun after application is complete.
  • Keep surface dry for atleast one hour after application
  • Wipe any water off thesurface during the first 24 hours after application
  • Avoid washing with anysoaps for the first 7 days

 

Precautions:

 

  • Never allow highlyalkaline (ph11+) chemicals such as non-diluted all purpose cleaners to sit ordwell on the surface for extended periods. This may damage and cause the coating to lose its hydrophobic ability.
  • Do not apply in directsun or on hot surface
  • Do not re-use 4"Suede applicators
  • Do not re-use thetowels you used to buff off with unless you immediately toss them in a bucketof APC after use to avoid glass crystals forming on them
  • Wear hand protection(disposable gloves)
  • Avoid vapors and usesuitable respiratory protection